<h3 style>Drill Point Drywall Screw</h3>
<p style>Drywall to heavy steel fastener for 35 – 90 mil steel</p>
<h3 style>Key Features</h3>
<ul >
<li><p ><strong>Phillips recess provides smooth engagement with
moderate torque transmission</p></li>
<li><p ><strong>Bugle head provides consistent penetration without
damaging the paper</p></li>
<li><p ><strong>Fine threads provide improved holding power and
thread-forming capability when driving into heavy steel
studs</p></li>
<li><p ><strong>Forged and hardened drill point</p></li>
<li><p ><strong>Gray phosphate is an economical rust inhibitor meant
for interior applications only.</p></li>
<li><p ><strong>ICC approval information available in ESR-3558</p></li>
</ul>
<h3 >INSTALLATION GUIDELINES</h3>
<ul >
<li><p >Use a screwdriver with a precise depth-sensitive clutch
and speeds of up to 5000 RPM</p></li>
<li><p >Overdriving may cause a weak connection or thread
strip-out of the steel</p></li>
<li><p >The drive is finished when the screw is just below the
work surface without tearing the paper</p></li>
<li><p >Three full threads must extend past the base metal for
an acceptable connection
</p></li></ul>
<h3 style>Drill Point Drywall Screw</h3>
<p style>Drywall to heavy steel fastener for 35 – 90 mil steel</p>
<h3 style>Key Features</h3>
<ul >
<li><p ><strong>Phillips recess provides smooth engagement with
moderate torque transmission</p></li>
<li><p ><strong>Bugle head provides consistent penetration without
damaging the paper</p></li>
<li><p ><strong>Fine threads provide improved holding power and
thread-forming capability when driving into heavy steel
studs</p></li>
<li><p ><strong>Forged and hardened drill point</p></li>
<li><p ><strong>Gray phosphate is an economical rust inhibitor meant
for interior applications only.</p></li>
<li><p ><strong>ICC approval information available in ESR-3558</p></li>
</ul>
<h3 >INSTALLATION GUIDELINES</h3>
<ul >
<li><p >Use a screwdriver with a precise depth-sensitive clutch
and speeds of up to 5000 RPM</p></li>
<li><p >Overdriving may cause a weak connection or thread
strip-out of the steel</p></li>
<li><p >The drive is finished when the screw is just below the
work surface without tearing the paper</p></li>
<li><p >Three full threads must extend past the base metal for
an acceptable connection
</p></li></ul>
