Senco - DuraSpin Metal to Metal - #8 x 1/2" Modified Truss Head Drill Point 1M - 08M050CTRFDP

<h3 style>Modified Truss Head Drill Point</h3>

<p style>Metal to Metal Framing Fastener</p>

<h3 style>Key Features</h3>

<ul >

<li><p ><strong>Phillips recess provides smooth engagement with

moderate torque transmission</p></li>

<li><p ><strong>Low profile head</p></li>

<li><p ><strong>Fine threads provide improved holding power and

thread-forming capability when driving into heavy steel

studs</p></li>

<li><p ><strong>Forged and hardened drill point</p></li>

<li><p ><strong>Clear zinc finish</p></li>

<li><p ><strong>ICC approval information available in ESR-3558</p></li>

</ul>

<h3 >INSTALLATION GUIDELINES</h3>

<ul >

<li><p >Use a screwdriver with a precise depth-sensitive clutch

and speeds of up to 2500 RPM</p></li>

<li><p >Overdriving may cause a weak connection or thread

strip-out of the steel</p></li>

<li><p >Three full threads must extend past the base metal for an acceptable connection</p></li>

</ul>