<h3 style>DS230-M1</h3>
<p style>2" Collated Screwdriver Attachment</p>
<h3 style>Key Features</h3>
<ul >
<li><p ><strong>Feed on return functionality to improve speed and reliability of drives</p></li>
<li><p ><strong>Patented Sliding Screw Guide</p></li>
<li><p ><strong>Corner-Fit Feed System</p></li>
<li><p ><strong>Universal nosepiece for drywall and wood applications</p></li>
<li><p ><strong>Tool-free screw length adjustment</p></li>
<li><p ><strong>Convert a standard screwdriver into an collated screwdriver in seconds. For Makita screwdrivers (FS2200, FS2500, FS4200, FS6200, XSF03, XSF04, XSF05)</p></li>
</ul>
<h3 style>Modified Truss Head Drill Point</h3>
<p style>Metal to Metal Framing Fastener</p>
<h3 style>Key Features</h3>
<ul >
<li><p ><strong>Phillips recess provides smooth engagement with
moderate torque transmission</p></li>
<li><p ><strong>Low profile head</p></li>
<li><p ><strong>Fine threads provide improved holding power and
thread-forming capability when driving into heavy steel
studs</p></li>
<li><p ><strong>Forged and hardened drill point</p></li>
<li><p ><strong>Clear zinc finish</p></li>
<li><p ><strong>ICC approval information available in ESR-3558</p></li>
</ul>
<h3 >INSTALLATION GUIDELINES</h3>
<ul >
<li><p >Use a screwdriver with a precise depth-sensitive clutch
and speeds of up to 2500 RPM</p></li>
<li><p >Overdriving may cause a weak connection or thread
strip-out of the steel</p></li>
<li><p >Three full threads must extend past the base metal for an acceptable connection</p></li>
</ul>
<h3 style>Sharp Point Drywall Screw</h3>
<p style>Drywall to wood fastener</p>
<h3 style>Key Features</h3>
<ul >
<li><p ><strong>Phillips recess provides smooth engagement with
moderate torque transmission</p></li>
<li><p ><strong>Bugle head provides consistent penetration without
damaging the paper</p></li>
<li><p ><strong>Coarse threads are ideal for use in wood connections</p></li>
<li><p ><strong>Ultra sharp point quickly penetrates wood reducing
drive time</p></li>
<li><p ><strong>Gray phosphate is an economical rust inhibitor meant
for interior applications only.</p></li>
<li><p ><strong>Exterior finish exceeds 1000 hours salt spray per ASTM
B117</p></li>
</ul>
<h3 >INSTALLATION GUIDELINES</h3>
<ul >
<li><p >Use a screwdriver with a precise depth-sensitive clutch
and speeds of up to 5000 RPM</p></li>
<li><p >Overdriving may cause a weak connection</p></li>
<li><p >The drive is finished when the screw is just below the
work surface without tearing the paper</p></li>
<li><p >1” of penetration is suggested for drywall to wood
applications</p></li></ul>
<h3 style>Drill Point Drywall Screw</h3>
<p style>Drywall to heavy steel fastener for 35 – 90 mil steel</p>
<h3 style>Key Features</h3>
<ul >
<li><p ><strong>Phillips recess provides smooth engagement with
moderate torque transmission</p></li>
<li><p ><strong>Bugle head provides consistent penetration without
damaging the paper</p></li>
<li><p ><strong>Fine threads provide improved holding power and
thread-forming capability when driving into heavy steel
studs</p></li>
<li><p ><strong>Forged and hardened drill point</p></li>
<li><p ><strong>Gray phosphate is an economical rust inhibitor meant
for interior applications only.</p></li>
<li><p ><strong>ICC approval information available in ESR-3558</p></li>
</ul>
<h3 >INSTALLATION GUIDELINES</h3>
<ul >
<li><p >Use a screwdriver with a precise depth-sensitive clutch
and speeds of up to 5000 RPM</p></li>
<li><p >Overdriving may cause a weak connection or thread
strip-out of the steel</p></li>
<li><p >The drive is finished when the screw is just below the
work surface without tearing the paper</p></li>
<li><p >Three full threads must extend past the base metal for
an acceptable connection
</p></li></ul>
<h3 style>Drill Point Drywall Screw</h3>
<p style>Drywall to heavy steel fastener for 35 – 90 mil steel</p>
<h3 style>Key Features</h3>
<ul >
<li><p ><strong>Phillips recess provides smooth engagement with
moderate torque transmission</p></li>
<li><p ><strong>Bugle head provides consistent penetration without
damaging the paper</p></li>
<li><p ><strong>Fine threads provide improved holding power and
thread-forming capability when driving into heavy steel
studs</p></li>
<li><p ><strong>Forged and hardened drill point</p></li>
<li><p ><strong>Gray phosphate is an economical rust inhibitor meant
for interior applications only.</p></li>
<li><p ><strong>ICC approval information available in ESR-3558</p></li>
</ul>
<h3 >INSTALLATION GUIDELINES</h3>
<ul >
<li><p >Use a screwdriver with a precise depth-sensitive clutch
and speeds of up to 5000 RPM</p></li>
<li><p >Overdriving may cause a weak connection or thread
strip-out of the steel</p></li>
<li><p >The drive is finished when the screw is just below the
work surface without tearing the paper</p></li>
<li><p >Three full threads must extend past the base metal for
an acceptable connection
</p></li></ul>
<h3 style>Drill Point Drywall Screw</h3>
<p style>Drywall to heavy steel fastener for 35 – 90 mil steel</p>
<h3 style>Key Features</h3>
<ul >
<li><p ><strong>Phillips recess provides smooth engagement with
moderate torque transmission</p></li>
<li><p ><strong>Bugle head provides consistent penetration without
damaging the paper</p></li>
<li><p ><strong>Fine threads provide improved holding power and
thread-forming capability when driving into heavy steel
studs</p></li>
<li><p ><strong>Forged and hardened drill point</p></li>
<li><p ><strong>Gray phosphate is an economical rust inhibitor meant
for interior applications only.</p></li>
<li><p ><strong>ICC approval information available in ESR-3558</p></li>
</ul>
<h3 >INSTALLATION GUIDELINES</h3>
<ul >
<li><p >Use a screwdriver with a precise depth-sensitive clutch
and speeds of up to 5000 RPM</p></li>
<li><p >Overdriving may cause a weak connection or thread
strip-out of the steel</p></li>
<li><p >The drive is finished when the screw is just below the
work surface without tearing the paper</p></li>
<li><p >Three full threads must extend past the base metal for
an acceptable connection
</p></li></ul>
<h3 style>Drill Point Drywall Screw</h3>
<p style>Drywall to heavy steel fastener for 35 – 90 mil steel</p>
<h3 style>Key Features</h3>
<ul >
<li><p ><strong>Phillips recess provides smooth engagement with
moderate torque transmission</p></li>
<li><p ><strong>Bugle head provides consistent penetration without
damaging the paper</p></li>
<li><p ><strong>Fine threads provide improved holding power and
thread-forming capability when driving into heavy steel
studs</p></li>
<li><p ><strong>Forged and hardened drill point</p></li>
<li><p ><strong>Gray phosphate is an economical rust inhibitor meant
for interior applications only.</p></li>
<li><p ><strong>ICC approval information available in ESR-3558</p></li>
</ul>
<h3 >INSTALLATION GUIDELINES</h3>
<ul >
<li><p >Use a screwdriver with a precise depth-sensitive clutch
and speeds of up to 5000 RPM</p></li>
<li><p >Overdriving may cause a weak connection or thread
strip-out of the steel</p></li>
<li><p >The drive is finished when the screw is just below the
work surface without tearing the paper</p></li>
<li><p >Three full threads must extend past the base metal for
an acceptable connection
</p></li></ul>
<h3 style>Sharp Point Drywall Screw</h3>
<p style>Self-Tapping screw for attaching Gypsum board to
25-20 gauge steel studs </p>
<h3 style>Key Features</h3>
<ul >
<li><p ><strong>Phillips recess provides smooth engagement with
moderate torque transmission</p></li>
<li><p ><strong>Bugle head provides consistent penetration without
damaging the paper</p></li>
<li><p ><strong>Double threads provide improved holding power and
thread-forming capability when driving into steel
</p></li>
<li><p ><strong>Ultra sharp point quickly penetrates wood reducing
drive time</p></li>
<li><p ><strong>Gray phosphate is an economical rust inhibitor meant
for interior applications only.</p></li>
<li><p ><strong>ICC approval information available in ESR-3558
</p></li>
</ul>
<h3 >INSTALLATION GUIDELINES</h3>
<ul >
<li><p >Use a screwdriver with a precise depth-sensitive clutch
and speeds of up to 5000 RPM</p></li>
<li><p >Overdriving may cause a weak connection or thread
strip-out of the steel</p></li>
<li><p >The drive is finished when the screw is just below the
work surface without tearing the paper</p></li>
<li><p >Three full threads must extend past the base metal for
an acceptable connection</p></li></ul>
<h3 style>Sharp Point Drywall Screw</h3>
<p style>Drywall to wood fastener</p>
<h3 style>Key Features</h3>
<ul >
<li><p ><strong>Phillips recess provides smooth engagement with
moderate torque transmission</p></li>
<li><p ><strong>Bugle head provides consistent penetration without
damaging the paper</p></li>
<li><p ><strong>Coarse threads are ideal for use in wood connections</p></li>
<li><p ><strong>Ultra sharp point quickly penetrates wood reducing
drive time</p></li>
<li><p ><strong>Gray phosphate is an economical rust inhibitor meant
for interior applications only.</p></li>
<li><p ><strong>Exterior finish exceeds 1000 hours salt spray per ASTM
B117</p></li>
</ul>
<h3 >INSTALLATION GUIDELINES</h3>
<ul >
<li><p >Use a screwdriver with a precise depth-sensitive clutch
and speeds of up to 5000 RPM</p></li>
<li><p >Overdriving may cause a weak connection</p></li>
<li><p >The drive is finished when the screw is just below the
work surface without tearing the paper</p></li>
<li><p >1” of penetration is suggested for drywall to wood
applications</p></li></ul>
<h3 style>Sharp Point Drywall Screw</h3>
<p style>Self-Tapping screw for attaching Gypsum board to
25-20 gauge steel studs </p>
<h3 style>Key Features</h3>
<ul >
<li><p ><strong>Phillips recess provides smooth engagement with
moderate torque transmission</p></li>
<li><p ><strong>Bugle head provides consistent penetration without
damaging the paper</p></li>
<li><p ><strong>Double threads provide improved holding power and
thread-forming capability when driving into steel
</p></li>
<li><p ><strong>Ultra sharp point quickly penetrates wood reducing
drive time</p></li>
<li><p ><strong>Gray phosphate is an economical rust inhibitor meant
for interior applications only.</p></li>
<li><p ><strong>ICC approval information available in ESR-3558
</p></li>
</ul>
<h3 >INSTALLATION GUIDELINES</h3>
<ul >
<li><p >Use a screwdriver with a precise depth-sensitive clutch
and speeds of up to 5000 RPM</p></li>
<li><p >Overdriving may cause a weak connection or thread
strip-out of the steel</p></li>
<li><p >The drive is finished when the screw is just below the
work surface without tearing the paper</p></li>
<li><p >Three full threads must extend past the base metal for
an acceptable connection</p></li></ul>
No results match your search. Try removing a few filters.